User Manual

g
REPRODUCE: LEVEL knob
Adjusts the output level of the reproduction deck.
h
REPRODUCE: ADJUST HIGH knob
Adjusts the high range gain of the reproduction deck.
i
VU ADJUST switch
When you turn this button on, the VU ADJUST knob, instead of the VU meter for Channel 2, appears in the meter
section. If you turn this button off, the VU meter for Channel 2 appears.
VU ADJUST knob
Specifies the level assigned to 0VU on the VU meter. This knob will appear only if the VU ADJUST
button is turned on.
j
SPEED switch
Selects the tape speed.
k
TAPE KIND switch
Selects the tape type.
l
RECORD/REPRO switch
Enables you to select RECORD (input to the recording deck) or REPRO (output from the reproduction deck) as
the signals to be monitored via the level and VU meters.
m
Level meter
Shows the effect level of the monitoring signals selected via the RECORD/REPRO switch.
n
VU meters
The VU meters of the deck selected via the RECORD/REPRO switch are displayed here. The number of VU
meters varies depending on the status of the VU ADJUST button. If the VU ADJUST button is turned on, the
meter for one channel will be displayed. If the VU ADJUST button is turned off, the meters for two channels will
be displayed.
707
Plug-ins > Controlling the OpenDeck plug-in parameters