User Manual

Recording
2-track USB recorder
The RIVAGE PM series features an easy-to-use 2-track USB recorder. The 2-track USB recorder enables you to
record output signals from the STEREO bus or a MIX bus to a connected USB flash drive. You can also use it to
play background music or sound effects that are stored on a USB flash drive by assigning them to an input
channel. Due to a built-in SRC (sampling rate converter), as well as the input and output from the 2-track USB
recorder, you do not have to worry about differences in sampling rates between the system and the
recording/playback files. If the system’s sampling rate is the same as that of the recording/playback files, the
SRC will automatically be bypassed. The RIVAGE PM series supports WAV (uncompressed PCM) and MP3
(MPEG-1 Audio Layer-3) file formats for recording and playback.
■ Supported recording format
WAV files
• Bit depth: 16-bit/24-bit
• Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
MP3 files
• Bit rate: 192 kbps, 256 kbps, 320 kbps
• Sampling rate: 44.1 kHz, 48 kHz
■ Supported playback format
WAV files
• Bit depth: 16-bit/24-bit
• Sampling rate: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
MP3 files
• Bit rate: No restriction.
• Sampling rate: 44.1 kHz, 48 kHz
■ Title list
You can change the order of the audio files shown in the title list, and play them repeatedly in a desired
order.
713
Recording > 2-track USB recorder