User Manual

3 Connect a USB flash drive with sufficient free capacity to the RECORDING
connector.
The FREE SIZE field indicates the amount of free capacity. When you connect a USB flash drive
to the RECORDING connector, a YPE folder and a SONGS folder within that YPE folder will be
created automatically in the root directory of the USB flash drive. The files created by
recording operations will be saved in the above SONGS folder, or in the currently-selected
folder below that level.
■Directory structure of a USB flash drive
When you connect a USB flash drive to the USB connector, a YPE folder and a SONGS folder
within that YPE folder will be created automatically in the root directory of the USB flash drive.
The files created by recording operations will be saved in the above SONGS folder, or in the
currently-selected folder below that level.
Song
(audio file)
Root directory
YPE folder
SONGS folder
4 Assign desired channels to the input and output of the USB memory recorder.
(“Assigning channels to the input/output of the recorder”(p.734))
5 To monitor the signal being recorded, raise the fader for the channel(s) that are
patched to the input of the recorder.
The level of the input signal to the recorder is shown by the RECORDER INPUT field’s level
meter in the RECORDER screen. If necessary, use the GAIN knob in the RECORDER INPUT field
to adjust the input level to the recorder.
715
Recording > Recording audio to a USB flash drive