User Manual

1 (Ground))
3 (cold))
2 (Hot))
Male XLR plug
h
OMNI OUT jacks
These are balanced XLR-3-32 male output jacks that transmit analog audio signals.
Female XLR plug
2 (Hot))
3 (cold))
1 (Ground))
i
AES/EBU jacks
Both input and output jacks feature built-in sampling rate converters.
IN
These are balanced XLR-3-31 female input jacks that accept digital audio signals in AES/EBU format.
OUT
These are balanced XLR-3-32 male output jacks for outputting digital audio signals in the AES/EBU format.
j
MY card slots
Install optional Mini-YGDAI I/O cards here to expand I/O ports.
k
USB port
Use these ports to connect a USB storage device such as a flash drive, USB mouse, or USB keyboard.
l
WORD CLOCK OUT connector (CS-R10, CS-R10-S)
This BNC connector is used to transmit word clock signal to an external device.
WORD CLOCK OUT/IN connectors (CSD-R7)
These are BNC connectors used to transmit/receive word clock signals to/from an external device. The WORD CLOCK
IN connector is internally terminated by a 75-ohm resistor.
72
Part Names & Functions (CS-R10, CS-R10-S, CSD-R7) > Rear panel of the control surface