User Manual

f
Continuous Patch
button
Press the continuous patch
button, and then rotate the REC OUT select knob to patch the intersecting channels
continuously. If you press the continuous patch
button, the button and the button will appear. Press
the
button again to confirm the selected continuous patches. Press the button to revert the continuous
patches to their previous state.
g
PLAYBACK IN ASSIGN
This area indicates the number of PLAYBACK INs assigned to each channel.
h
REC OUT select knob
Enables you to select a channel used for REC OUTs.
i
REC OUT ASSIGN (assign)
This area indicates the number of REC OUTs assigned to each channel.
j
PLAYBACK IN select knob
Enables you to select channels used for PLAYBACK INs.
k
CLEAR ALL button
Press this button to clear all selections.
l
VIRTUAL SOUND CHECK ON button
If this button is on, the Virtual Sound Check function will be enabled, and the patches will be used for the virtual
sound check. If virtual sound check is turned ON, it will be indicated on the status indicator on the menu bar or in the
channel name area.
Virtual sound check display
When Virtual Sound Check is turned on, it is reflected in the display on the touch screen.
Channel name area SELECTED CHANNEL VIEW screen PATCH field
VSC ON VSC OFF
Channels with virtual sound check on and check button （e） on are set so that A/B Patch selection is
disabled and virtual soundcheck patches are enabled.
743
Recording > RECORDING PATCH screen