User Manual

Configuring a Dante Virtual Soundcard
Install a Dante Virtual Soundcard (DVS) and Dante Controller on the computer that you will use for audio
recording. And then, make the following settings before you turn on the DVS.
(
Connect the GbE-compatible network port of the computer to a GbE-compatible network switch.
(
Configure the computer to obtain an IP address automatically (this is the default setting).
(
Specify the Dante latency. (Choose a larger value for stable multi-channel recording/playback.)
(
In the Advanced settings, select the number of channels to be used for recording and playback (the default
is 8 x 8).
NOTE
Please refer to the Dante Virtual Soundcard User’s Guide for more information on ASIO settings (Windows OS).
746
Recording > Configuring a Dante Virtual Soundcard