User Manual

Audio recording and playback
After you have made the driver settings in your DAW software, you can record and play back audio. For
multitrack recording, set the input ports for tracks in DAW software to the ports that receive audio signals
from the I/O rack. For a virtual sound check, you must route recorded audio signals to the input channels on
the RIVAGE PM series. To do so, use Dante Controller to patch the signals so that the signals will be output
from the DAW software to the RIVAGE PM series. Using the VIRTUAL SOUND CHECK ON button on the
RECORDING PATCH screen, you can easily switch between two settings: one setting for routing audio signals
from the I/O rack, and another setting for routing audio signals from DAW software. In addition, you will be
able to patch a specific channel (such as a vocal) to the I/O rack to monitor during a virtual sound check
using the RECORDING PATCH screen.
749
Recording > Audio recording and playback