User Manual

CAUTION
(
While Overlay is enabled, if you recall a scene that was stored or globally-pasted with added offset values, both the current
offset values and the original offset values will be applied to the scene, thus, doubling the offset value. In this case, extremely
high volume sound may be output. Confirm the status of a scene to recall, and the on/off status of Overlay, before recalling the
scene.
NOTE
(
You can make settings such that the recall confirmation dialog box will not appear.
(
If you press and hold down either of the SCENE MEMORY [INC]/[DEC] keys, the scene number will count up or down
continuously. If you press and hold down either of the SCENE MEMORY [INC]/[DEC] keys, the scene number will
increment or decrement quickly.
(
If you press the SCENE MEMORY [INC] and [DEC] keys simultaneously, the SCENE field indication will return to the
number of the currently-loaded scene.
(
You cannot store data to a protected scene number.
764
Scene memory > Recalling scenes (Using the keys in the SCENE MEMORY section)