User Manual

Storing scenes (Using the SCENE LIST screen)
1 Press the SCENE field on the menu bar.
SCENE field
This screen includes several pages, which you can switch between using the tabs located at
the top of the screen.
2 Press the SCENE LIST tab.
The view switches to the “SCENE LIST screen”(p.768).
3 Press the SCENE STORE button.
The SCENE STORE window will appear, enabling you to assign a title or comment to the scene.
4 Enter a scene number as the store-destination.
To enter an integer, use the leftmost screen encoder on the bay. To enter a decimal portion,
use the screen encoder located next to the right.
NOTE
You can also use the SCENE MEMORY [INC]/[DEC] keys to select scene numbers. To select a decimal portion, hold down the
[SHIFT] key and use the SCENE MEMORY [INC]/[DEC] keys. A yellow scene number indicates that the scene number has
already been used.
A red scene number indicates that the scene number has already been used and protected.
5 Assign a title or comment to the scene as desired.
6 Press the OK button located at the bottom of the SCENE STORE window.
A dialog box will ask you to confirm the store operation.
7 To execute the store operation, press the OK button.
The current mix data will be stored to the scene number you selected in step 4. If you decide to
cancel the store operation, press the CANCEL button instead of the OK button.
CAUTION
(
While Overlay is enabled, if you recall a scene that was previously stored with added overlay offset values, both the current
offset values and the original offset values will be applied to the scene (thus doubling the offset value). An extremely high
volume sound may be output as a result.
766
Scene memory > Storing scenes (Using the SCENE LIST screen)