User Manual

d
Scene title popup button
Indicates the title assigned to the scene. Press this button to access the SCENE STORE popup window, in which you
can edit the title.
e
Protect (lock) symbol
Indicates the write protect on/off status. Press this button to write-protect the scene, and the button will light. Press
it again to cancel write protection.
f
Selected scene
The currently-selected scene is highlighted in white in the list. If you press another scene number in the list, the list
will scroll and that scene cell will be displayed in the center of the list.
g
SCENE SELECT knob
Use the screen encoder to select a scene.
h
MULTI SELECT button
You can select consecutive multiple scenes by turning on this button and rotating the screen encoder.
i
Current scene select button
Press this button to select the scene that was recalled or stored most recently.
j
STORE button
Stores the current mix data as a new scene. Press this button to access the SCENE STORE popup window, which will
enable you to assign a name to a scene and store it.
k
UPDATE button
Updates scene data by overwriting the scene (that has been recalled or stored most recently) with the current mix
data.
l
RECALL button
Press this button to recall the currently-selected scene.
m
UPDATE UNDO button
Undoes the store operation. This button is valid only immediately after you perform an overwrite-store operation.
n
RECALL UNDO button
Undoes the recall operation. This button is valid only immediately after you perform a recall operation.
o
Page switching tabs
Switch the views for the right side of the SCENE LIST screen.
769
Scene memory > SCENE LIST screen