User Manual

Recalling scenes (Using the SCENE LIST screen)
1 Press the SCENE field on the menu bar.
2 Rotate the screen encoder to select the scene number of the scene you want to
recall.
3 Press the RECALL button.
A dialog box will ask you to confirm the recall operation.
4 To execute the recall operation, press the OK button.
The scene you selected in step 3 will be recalled. If you decide to cancel the recall operation,
press the CANCEL button instead of the OK button.
CAUTION
(
While Overlay is enabled, if you recall a scene that was stored or globally-pasted with added offset values, both the current
offset values and the original offset values will be applied to the scene, thus, doubling the offset value. In this case, extremely
high volume sound may be output. Confirm the status of a scene to recall, and the on/off status of Overlay, before recalling the
scene.
5 If you want to cancel the recall operation that you just performed, press the
RECALL UNDO button.
A dialog box will ask you to confirm the undo operation. Press the OK button if you want to
execute the operation. After undoing the recall, you can press the RECALL UNDO button once
again to Redo (re-execute).
NOTE
You can also use MIDI messages (Program Changes) to recall scenes (see page 375).
770
Scene memory > Recalling scenes (Using the SCENE LIST screen)