User Manual

4 In the FUNCTION column, select “SCENE.”
Proceed as follows, depending on the function you want to assign.
• To assign INC RECALL or DEC RECALL
Choose “INC RECALL” or “DEC RECALL” in the PARAMETER 1 column.
• To assign• DIRECT RECALL
Choose “DIRECT RECALL” in the PARAMETER 1 column, and choose “SCENE #xxx” (xxx is the
scene number) in the PARAMETER 2 column.
5 When you finish making settings, press the OK button to close the popup window.
If desired, assign scene-recall functions to other USER DEFINED keys in the same way.
6 Press the USER DEFINED key to which you assigned a recall function.
The corresponding scene will be recalled.
CAUTION
(
While Overlay is enabled, if you recall a scene that was stored or globally-pasted with added offset values, both the current
offset values and the original offset values will be applied to the scene, thus, doubling the offset value. In this case, extremely
high volume sound may be output. Confirm the status of a scene to recall, and the on/off status of Overlay, before recalling the
scene.
773
Scene memory > Using USER DEFINED keys to recall a scene (Direct Recall function)