User Manual

Using the Focus function
“Focus” is a function that lets you specify the scene parameters that will be recalled (loaded) when you recall
a scene. You can enable or disable this function for each scene individually. For example, it can be
convenient to use this function if you want to recall only the input channel settings of a certain scene.
NOTE
In contrast to Focus, the RIVAGE PM series also features a “Recall Safe” function that enables you to exclude specific channels and
parameters from recall operations. However, while the Focus Recall function can be specified individually for each scene, the Recall
Safe function settings are common to all scenes.
1 Press the SCENE field on the menu bar to access the SCENE LIST screen.
2 Press the FOCUS tab at the top of the SCENE LIST screen.
The “FOCUS field”(p.786) appears in the right half of the SCENE LIST screen.
3 Press the SET popup button of the scene for which you want to make Focus
settings.
The SCENE SETUP (FOCUS) popup window appears.
4 To select a target channel to be set, press the + button on the channel display b to
expand the channel display, and then scroll through the category select list
(channel) a.
5 If you want to apply the Focus function only to specific parameters, use the
parameter buttons i to select those parameters (multiple selections are allowed).
If you want to apply the Focus function to all parameters, turn on the ALL ON
button f.
6 Turn on the channel Focus ON button e for the channels to which you want to
apply the Focus function.
If you want to apply the Focus function to all channels, turn on the ALL channel Focus ON
button d.
7 When you finish making settings, press the “x” symbol to close the window.
The FOCUS PARAMETER indicator on the FOCUS tab of the SCENE LIST screen will show the
Focus setting status of the scene for which the Focus function is configured.
NOTE
Scenes for which the FOCUS button is turned on are marked by a “FOCUS” indicator in the STATUS field of the SCENE LIST
window (COMMENT tab).
8 Recall a scene for which you have made Focus settings.
Only the channels/parameters selected in the SCENE SETUP (FOCUS) popup window will be
recalled.
784
Scene memory > Using the Focus function