User Manual

k
BUS/OTHERS popup button
Press this button to access a popup window where you can specify how the Focus function affects basic MIX bus
settings, channel link, and fader layer position.
l
LIBRARY button
Press this button to open the FOCUS library window.
m
SET BY SEL button
If this button is on, you will be able to add a channel by using the corresponding [SEL] key.
n
REVERT button
If you press this button, all changes that you made up to that point will be canceled, reverting to their prior state.
o
APPLY button
Pressing the button will apply the setting changes.
p
ALL ON button/ALL OFF button
Turns on/off all settings including those in the PLUG-IN/GEQ and BUS/OTHERS tabs.
Button indications
The button indications will change according to the parameter status.
ON
OFF
Partially ON
789
Scene memory > SCENE SETUP (FOCUS) popup window