User Manual

SCENE SETUP (FADE TIME) popup window
4
351
2
In this popup window you can select the channels to which Fade will be applied, and adjust the fade time.
a
Channel display field
In this field, the channels or DCAs to which Fade is applied (selected in the channel select field b) are highlighted.
b
Channel select field
Enables you to select the channels/DCAs to which Fade is applied.
c
SET BY SEL button
If this button is on, you will be able to add a channel by using the corresponding [SEL] key.
d
FADE TIME knob
Enables you to set the fade time. Use the corresponding screen encoder to adjust the value.
e
CLEAR ALL button
Press this button to restore the default settings of the selected channel or fade time.
793
Scene memory > SCENE SETUP (FADE TIME) popup window