User Manual

Automatic alignment of events
When the AUTO ALIGN button is turned on, the events registered with the TIME CODE button (TIME CODE
events) are automatically sorted.
When turned off, the TIME CODE event can be swapped freely. The TIME CODE events can be sorted by
performance, greatly increasing the operational flexibility.
■Difference in behavior when AUTO ALIGN is turned on / off
AUTO ALIGN = ON AUTO ALIGN = OFF
UP/DOWN button
You can switch events other than the
TIME CODE event.
※ MANUAL and INTERVAL events can
be replaced with TIMECODE events.
All events can be replaced.
Creating a new TIME CODE event
According to the time code, the event is
inserted just before the next TIME CODE
event. *1
The event will be inserted at the
selected position on the list with the
specified time code. *1
Change TIME CODE event
MANUAL/INTERVAL → TIME CODE
TIME CODE → TIME CODE (Time change)
The event moves according to the set
time. *1
The event position does not change.*1
Change current timecode
If a TIME CODE event at the changed
time exists, that event will be executed
and you will be taken to that event.
If the event at the changed time does
not exist, it moves to the last TIME CODE
event before that time. (Does not
execute.)
If a TIME CODE event at the changed
time exists, that event will be executed
and you will be taken to that event.
Playback by timecode
When the time code being played reaches the time set in the TIME CODE event,
that TIME CODE event is executed.
*1 If an event with the same time exists, that previous event will be overwritten.
817
Scene memory > Automatic alignment of events