User Manual

About the Isolate function
This function protects an entire channel module from any type of memory recall; not only scene memory but
also libraries such as EQ or Dynamics. The Isolate function protects parameters of the isolated channel from
scene recall and library recall.
NOTE
(
If you load the setting file, the parameters of the isolated channel will not be protected by the Isolate function.
(
The parameters of the isolated channel will not be protected from GEQ or plug-in library recall.
Example: Suppose that during the actual performance, you need to disconnect a certain input channel from
the mixing. In this case, you could disconnect that channel by turning on all of its Recall Safe settings, but
that channel is being used with partial Recall Safe for a different purpose. In this case, the desired operation
will not be obtained unless you manually change the Recall Safe filter settings. However by using the Isolate
function, you can instantly disconnect that channel regardless of Recall Safe. DCA operations will also be
ignored.
The Isolate on/off parameter is provided on each channel.
821
Scene memory > About the Isolate function