User Manual

Using Preview mode (Using the keys in the SCENE
MEMORY section）
1 Press the [PREVIEW] key.
When you enter Preview mode, the SCENE MEMORY display of the SCENE MEMORY section
indicates [PREVIEW], and the [PREVIEW] key is lit. The SCENE field in the menu bar flashes red,
and the PREVIEW button in the SCENE LIST screen is lit red.
2 Use the SCENE MEMORY [INC]/[DEC] keys to select the scene number that you want
to recall.
3 Press the SCENE MEMORY [RECALL] key.
4 As necessary, use the controllers of the panel to edit the settings.
5 If you want to store the settings that you made in step 4, press the SCENE MEMORY
[STORE] key. If you want to overwrite and update the edited content onto the
scene that is recalled or stored, press the SCENE MEMORY [UPDATE] key.
6 When you have finished checking or editing the settings of the scene, press the
[PREVIEW] key.
NOTE
(
PREVIEW mode applies to all the parameters that are included in the scene memory.
(
Settings not included in a scene memory (such as Port to port PATCH settings) are reflected by the current scene even
during in Preview mode.
(
Even in PREVIEW mode, the Recall Safe function, Focus function, and Isolate function are operative.
823
Scene memory > Using Preview mode (Using the keys in the SCENE MEMORY section）