User Manual

About the functions in Preview mode
The current scene will change in response to operations in the following software or external devices.
(
RIVAGE PM Editor
(
StageMix
(
MIDI Rx
(
GPI IN
In the same way, communication is sent to the following software or external devices when you change the
current scene.
(
RIVAGE PM Editor
(
StageMix
(
MIDI Tx
(
GPI OUT
The meters indicate the state of signal processing for the current scene.
The following functions do not operate in Preview mode.
(
Synchronization of settings (except when synchronization occurs automatically)
(
File save/load functions
(
Cue changes
(
USER DEFINED keys
(
USER DEFINED knobs
(
USER DEFINED keys and USER DEFINED knobs in CONTROLS
(
Changes or display of monitor, cue, oscillator, talkback, PHONES, or RTA
(
Changes or display of the USB recorder
(
Changes to DANTE SETUP or DANTE PATCH
(
Fade function
(
MIDI CLOCK or tap tempo function of plug-ins
(
Maintenance
(
Cue changes for an insert or plug-in
(
Cue or key-in changes for DynamicEQ, DynamicEQ4, or MBC4 plug-ins
(
CSV import/export
(
[HOME] key
(
BOOKMARK operation (via GPI)
(
VSC on/off switching
(
Overlay function (the OVERLAY SETTING screen and operations of the [OVERLAY] key)
Additionally, it is not possible to enter Preview mode during the following operations.
(
While pasting a scene or EQ
(
While executing Global Paste
(
While synchronizing settings data
(
While saving/loading a file
825
Scene memory > About the functions in Preview mode