User Manual

OVERLAY SETTING screen
3
87
4 5 6
921
This screen contains the following items.
a
Overlay ON button
Turn this button on to enable the offset value.
b
CLEAR button
Press this button to clear the selected parameter setting.
c
Overlay parameter setting knob
While Overlay is turned on, you can set the value between -20.00dB and +10.00dB.
d
Category select list (channel)
Enables you to select a channel category. The categories correspond to the following channels.
(
CH1-144 145-288 (only for DSP-RX-EX）
(
MIX1-72
(
MTX1-36
(
STEREO.........................ST A L, ST A R, ST B L, ST B R
(
DCA GROUPS.............DCA1-24
You can press the + or − button located to the right to expand or collapse the channel parameter indication for each
category.
e
Channel display
Indicates the channel name.
834
OVERLAY > OVERLAY SETTING screen