User Manual

File
SAVE/LOAD
You can store and load all data of the RIVAGE PM series to and from a USB flash drive connected to the USB
port on the control surface.
NOTE
(
You cannot use the RECORDING connector (a USB port dedicated for recording) for save and load operations.
(
The system will recognize only one USB flash drive that is connected to one of the USB ports. Do not connect multiple USB flash
drives.
(
The operation of USB 2.0 or 3.0 flash drives only is guaranteed.
(
The operation of USB flash drives with capacities of up to 32GB has been verified. (However, this does not necessarily guarantee
the operation of all USB flash drives.) The FAT16 and FAT32 formats are supported.
(
“ACCESS” will appear on the status indicator while data is being accessed (i.e., saved, loaded, or deleted). During this time, do
not remove the USB flash drive or power-off the control surface. Doing so may damage the data on the storage media.
837
File > SAVE/LOAD