User Manual

Data handled by a settings file
Settings data of a system based on the RIVAGE PM series can be saved on a USB flash drive as a settings file.
The settings file will have a file name extension of “.RIVAGEPM”. The settings file contains all data such as
scenes, libraries, and system setup.
 indicates data stored in scene memory
SYSTEM SETUP
SYSTEM CONFIG
System settings (TWINLANe bandwidth settings, settings for the units
that are part of the system)
★ BUS SETUP Bus settings
MIDI/GPI MIDI/GPI settings
ENVIRONMENTAL
CUSTOM FADER Custom fader bank settings
USER DEFINED KEYS USER DEFINED KEYS function assignments
USER DEFINED KNOBS USER DEFINED KNOBS function assignments
PREFERENCES Settings for the operating environment
BRIGHTNESS/
CONTRAST
Settings such as display brightness and contrast
PATCH
★ INPUT Input port patching settings
★ OUTPUT Output port patching settings
★ INSERT Insert patching settings
★ DIRECT OUT Patching settings for output ports that perform direct output
PORT TO PORT Patching settings for Port to port
★ RECORDING Patching settings for recording
MIXING DATA
★ HA Head amp settings
★ INPUT CH Input channel mixing data
★ MIX MIX channel mixing data
★ STEREO STEREO channel mixing data
★ MATRIX MATRIX channel mixing data
★ GEQ/PEQ GEQ/PEQ mount status and parameters
★ PLUG-IN Plug-in mount status and parameters
★ NAME Input channel/output channel names, colors, and icon settings
MONITOR/CUE/Other
MONITOR Monitor settings
CUE Cue settings
OSCILLATOR Oscillator settings
838
File > Data handled by a settings file