User Manual

2 Press the SAVE/LOAD button to access the SAVE/LOAD popup window.
3 Press the SAVE button in the SAVE/LOAD popup window.
The “SAVE SELECT screen”(p.842) will appear, in which you can select data to save.
4 In the SAVE SELECT screen, select a type of data to save.
NOTE
The SAVE button will become available if data to save exists.
5 Press the SAVE button in the SAVE SELECT screen.
A keyboard window will appear, allowing you to enter a file name and comment.
6 Enter a file name or comment, and press the OK button.
When the file has been saved, the PROCESSING popup window that shows the progress of the
writing operation will close.
NOTE
(
If you are going to overwrite a file or save a file with the same name in the same folder, a dialog will ask you to confirm
the overwrite.
(
You can enter a comment of up to 32 characters.
(
You may enter a file name of up to 16 characters. However, the drive name, path name, and file name are limited to a
total of 256 characters. If you exceed this limit, you may be unable to save the file, depending on the length of the file
name. If this error indication appears at the bottom of the screen, shorten the file name and try saving the file again.
841
File > Saving the RIVAGE PM series’s settings on a USB flash drive