User Manual

d
BAY LINK
This sets the function for linking between multiple bays. White lines connect the linked bays.
(
BAY LINK: Selects layer settings for faders, or settings for linked bays.
(
SENDS ON FADER: SENDS ON FADER on/off and send-destination bus
(
SEND BLOCK: Selects the 12 buses at the send destination when the OVERVIEW screen is selected
(
SHIFT KEY: Turns the [SHIFT] key on/off
(
CH STRIP ENCODERS: Switches the channel strip encoder selection
(
HOME KEY: Saves and recalls [HOME] key settings
(
CUE→SEL: Links the cue operations and channel selection
e
CUE OPERATION MODE field
Switches between cue’s BAY mode and CH mode (“Using the Cue function”(p.413)). In BAY mode, you can select CUE
A, CUE B, or CUE A+B for each bay. In CH mode, you can select CUE A, CUE B, or CUE A+B for each channel.
(
CUE SETTINGS popup button
Press this button to display the window, in which you can configure the cue for each channel in CH mode (“CUE
SETTINGS popup window”(p.420)).
878
User Setup > SURFACE SETTINGS1