User Manual

SCREEN SETTINGS
1 4
5
2
3
6
7
8
9
This screen contains the following items.
■ SCREEN OPTIONS
a
GAINS SHOWN ON OVERVIEW SCREEN
Enables you to select either ANALOG GAIN, DIGITAL GAIN or AUTO A.G./D.G. for each bay displayed on the OVERVIEW
screen.
For bays on which AUTO A.G./D.G. has been set, the analog gain will be shown for each channel on the ports that have
been patched where analog gain exists; and if analog gain does not exist, digital gain is shown.
b
PARAMETERS SHOWN ON SoF SCREEN
Enables you to select the parameter displayed on the SENDS ON FADER popoup window from FADER LEVEL, SEND
PAN, and SEND LEVEL.
c
NAMES
Select a label to be shown, from either the CHANNEL NAME, PORT NAME or address (PORT ADDRESS; example:
M1:RY1-1)
■ CONFIRMATION MESSAGES field
d
SCENE MEMORY
Enables you to turn on or off options related to scene store/update/recall operations. If these ON buttons are lit, a
confirmation message will appear when you perform a Store, Update, or Recall operation respectively.
882
User Setup > SCREEN SETTINGS