User Manual

Channel Strip section: Using the CUSTOM [1]/[2] keys
(CS-R10, CSD-R7)
a
CUSTOM [1]/[2] keys
Enable you to select a custom layer. Normally, you can assign custom faders of two banks (total of 12 layers) to each
custom layer.
NOTE
Press CUSTOM [1] and CUSTOM [2] together to enter Custom mode, where you can assign custom faders of five banks (total of
60 layers). Use the INPUT [1-72] and [73-144] keys, the [MIX]/[MATRIX] keys, and the [DCA] key to select a Custom bank. Press
these two keys simultaneously again to return to normal mode.
b
Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer.
885
User Setup > Channel Strip section: Using the CUSTOM [1]/[2] keys (CS-R10, CSD-R7)