User Manual

Channel Strip section: Using the [CUSTOM] keys (CS-
R5、CS-R3)
a
[CUSTOM] key
Turns Custom mode on or off. Use the INPUT [1]/[2] keys, the [MIX]/[MATRIX] keys, and the [DCA] key to select a
Custom bank. The bank numbers (1–5) are labeled adjacent to these keys. Press and hold down to lock the Custom
mode. To unlock the mode, press and hold down again.
b
Layer Select [A]/[B]/[C]/[D]/[E]/[F] keys
Enable you to select a layer.
886
User Setup > Channel Strip section: Using the [CUSTOM] keys (CS-R5、CS-R3)