User Manual

CUSTOM FADER BANK popup window
CUSTOM FADER BANK popup window (when a bay is selected)
6 7 8 9
1
3
4
2
5
)
!
@
This screen contains the following items.
a
Bay select buttons
Enable you to select a bay or master faders to which you want to assign a combination of channels.
(
L....................................CUSTOM of bay L
(
C....................................CUSTOM of bay C
(
R....................................CUSTOM of bay R
(
MASTER....................................Master fader
b
Bank select buttons
Enables you to select a block you want to set up.
c
SET BY SEL button
If this button is on, you will be able to assign a channel by using the corresponding [SEL] key for the selected fader
assign button.
d
NAME popup buttons
Press one of these buttons to access the NAME popup window, in which you can name the blocks.
e
Fader assign buttons
Selects the position where a custom fader is to be assigned. Press the selected fader assign button once more to
display the CH SELECT screen, where you select the channel to assign. This also shows the channels that are
assigned.
889
User Setup > CUSTOM FADER BANK popup window