User Manual

3 Press the button corresponding to the USER DEFINED knob to which you want to
assign a function.
The system displays a popup window, in which you can assign a function to the USER DEFINED
knob.
4 Make sure that the FUNCTION field is enclosed by a frame, and then use the screen
encoder on the panel to select the function that you want to assign.
For details on the assignable functions and their parameters, refer to the data list.
5 If the selected function features parameters, specify the type of parameter you
want to assign by selecting in the following order: PARAMETER1 field ->
PARAMETER2 field -> PARAMETER3 field.
6 Press the OK button to close the popup window.
7 Assign the desired functions to other USER DEFINED knobs in the same way.
893
User Setup > Assigning a function to a USER DEFINED knob