User Manual

a
BANK tabs
Enable you to select the bank ([A], [B], [C], or [D]) for the USER DEFINED knobs.(Bank ([A]/[B]/[C]/[D])/[E]), CS-R3 only)
b
USER DEFINED KEYS 1–12
Link to USER DEFINED keys [1]–[12] on the panel. Press one of these buttons to access the popup window, in which
you can assign a function to the selected button. If nothing is assigned to the button, an indication of “NO ASSIGN” is
shown.
c
LABEL tab
Press this to toggle the screen where you can change the displayed contents.
d
BANK switch button (CS-R3 only)
Switches the panel USER DEFINED keys (A-B/C-D).
You can also switch using the BANK tab（a）. Press the BANK C tab, and press the panel USER DEFINED key. Bank
C/D is also selected.
913
User Setup > USER DEFINED KEYS popup window