User Manual

Function PARAMETER1 PARAMETER2 PARAMETER3 Description
CONSOLE SHUTDOWN
*1
Shuts down the control
surface.
NOTE
You can shut down the
control surface by
pressing and holding the
USER DEFINED key
assigned in CONSOLE
SHUTDOWN.
CUE
OUTPUT
A
Switches the CUE A on/
off.
B
Switches the CUE B on/
off.
CLEAR CUE
CUE A Clears the CUE A.
CUE B Clears the CUE B.
CUE A+B Clears the CUE A+B.
SPECIFIC CH
CH 1-288
Switches Cue Out on/
off.
MIX 1-72
MATRIX 1-36
STEREO A, B
DCA 1-24
CUE MODE A, B
Switches the cue
mode.
CUE INTERRUPTION A, B
Switches the CUE
INTERRUPTION
function on/off.
INPUT CUE POINT A, B
Switches the cue point
for the input channel.
DCA CUE POINT A, B
Switches the DCA cue
point.
OUTPUT CUE POINT A, B
Switches the cue point
for the output channel.
DSP MIRRORING *2
DSP SELECT A Switches the active
DSP engine between A
and B.
DSP SELECT B
DSP ACTIVATE A Forces the specified
engine to switch to
active. If this function is
assigned to GPI IN,
automatic switching
and other functionality
will be possible in the
event that the active
engine loses power.
DSP ACTIVATE B
EVENT LIST NEXT
Directly recalls the
next-numbered event.
917
User Setup > Functions that can be assigned to the USER DEFINED keys