User Manual

Function PARAMETER1 PARAMETER2 PARAMETER3 Description
METER PEAK HOLD
Turns the meter peak
hold on/off.
MIDI[CS] *1
PROGRAM CHANGE PGM 1–128
Transmits a program
change message of the
corresponding number
to an external device.
CONTROL CHANGE CC 1–31, 33–95, 102–119
Transmits a control
change of the
corresponding number
to an external device.
NOTE ON NOTE ON C-2(0)–G8(127)
Transmits a MIDI
message of the
corresponding number
to an external device.
MONITOR
COMMON DIMMER ON
Switches the DIMMER
on/off.
MONITOR A
OUTPUT
Switches MONITOR A
on/off.
SEL CH ASSIGN *1 DEFINE 1–8
Press this key to select
DEFINE. While
continuing to press the
key, press the [SEL] key
to switch the
assignment on/off.
During this time, the
[SEL] LED will light
when the assignment is
on, and the LED will
turn off when the
assignment is off. The
assignment settings
will be saved while
pressing this key. Press
the key once more to
recall the settings. You
can save settings to
multiple keys and
switch between
assignments.
MONITOR B
OUTPUT
Switches MONITOR B
on/off.
SEL CH ASSIGN *1 DEFINE 1–8
Press this key to select
DEFINE. While
continuing to press the
key, press the [SEL] key
to switch the
assignment on/off.
During this time, the
[SEL] LED will light
when the assignment is
on, and the LED will
turn off when the
assignment is off.
919
User Setup > Functions that can be assigned to the USER DEFINED keys