User Manual

Function PARAMETER1 PARAMETER2 PARAMETER3 Description
SURROUND PAN
PANNING Rs CH1–288
Switches the
assignment to the
surround bus on/off for
the selected channel.
PANNING BACK
SELECTED CH BAY L, BAY R, BAY C
CH1–288
PANNING SIDE L
SELECTED CH BAY L, BAY R, BAY C
CH1–288
PANNING SIDE R
SELECTED CH BAY L, BAY R, BAY C
CH1–288
PANNING CENTER
SELECTED CH BAY L, BAY R, BAY C
CH1–288
PANNING TOGGLE
SELECTED CH BAY L, BAY R, BAY C
CH1–288
TALKBACK
ON
LATCH
CURRENT GROUP,
GROUP 1–8CURRENT
GROUP, GROUP 1–8
Switches the Talkback
on/off.
UNLATCH
CURRENT GROUP,
GROUP 1–8
Talkback will be
switched on while this
is pressed.
TALK GROUP *1 1-8
Press this key to select
the specified group.
While continuing to
press the key, press the
[SEL] key for the output
channel to switch the
assignment on/off.
TAP TEMPO TEMPO 1–4 Sets TAP TEMPO.
USER DEFINED KEYS BANK SELECT (CS-R3)
A-B
Switches banks of the
USER DEFINE key.
（CS-R3 only）
C-D
TOGGLE
*1: Cannot be assigned to a USER DEFINED key in the PM Editor.
*2 Not available for the CSD-R7
*3: This also works for bays linked to bay C.
*4: The BAY ALL parameter works for all bays, and has been added as of ver. 3.
924
User Setup > Functions that can be assigned to the USER DEFINED keys