User Manual

Using the Alternate function
If you assign the Alternate function (ALTERNATE FUNCTION) to a USER DEFINED key, turning that key on will
toggle between parameter settings that are controlled via channel strip encoders (such as between ANALOG
GAIN and DIGITAL GAIN).
For the combination with the [CUE] key, this can be used as a substitute for the ALTERNATE CUE [Fn] key.
Alternate mode is engaged when you turn on the USER DEFINED key to which the Alternate function has
been assigned. You can select LATCH or UNLATCH for the Alternate function.
(
UNLATCH.....................Alternate mode is engaged only when you press and hold down the USER
DEFINED key.
(
LATCH.....................Pressing the USER DEFINED key repeatedly will switch Alternate mode on and off.
In this way, you do not need to press and hold down the USER DEFINED key to use the function.
If ALTERNATE FUNCTION is assigned to a USER DEFINED key, pressing the screen encoder repeatedly will
turn the function on and off.
On/off switchable functions
HPF/LPF
DYNAMICS1/DYNAMICS2
DELAY
SILK TEXTURE
SENDS
For the SENDS function, rotate the screen encoder to set PRE or POST.
You can also turn the function on or off by pressing the screen encoder while holding down the [SHIFT] key.
925
User Setup > Using the Alternate function