User Manual

Basic MIDI Settings
You can select the type of MIDI messages the RIVAGE PM series will transmit and receive. You can also select
the MIDI port that will be used.
1 Press the SETUP button on the menu bar to access the SETUP screen.
2 Press the MIDI/GPI [CS] button to open the MIDI/GPI [CS] popup window.
NOTE
If using the DSP engine, press the MIDI/GPI [DSP] button to access the MIDI/GPI [DSP] popup window. The subsequent
explanation is for when using the control surface.
This window includes several pages, which you can switch between using the tabs located at
the top of the window.
3 Press the MIDI SETUP tab.
“MIDI/GPI window (MIDI SETUP page)”(p.929)
4 To specify the channel on which MIDI messages will be transmitted or received,
press the channel select popup button.
The “MIDI SETUP popup window”(p.931) for selecting the channel appears.
927
MIDI/GPI > Basic MIDI Settings