User Manual

5 Select a channel.
To select an item, use the [TOUCH AND TURN] knob. Press the OK button to confirm the
selected channel and close the MIDI SETUP popup window.
NOTE
Alternatively, you can select the desired channel by pressing the channel entry in the field or by turning the corresponding
screen encoder.
6 Turn transmission/reception on or off for each MIDI message.
NOTE
(
For details on using Program Changes, refer to ““Using Program Changes to recall scenes”(p.932)” below.
(
For details on using Control Changes, refer to ““Using Control Changes to control parameters”(p.938).”
928
MIDI/GPI > Basic MIDI Settings