User Manual

c
PROGRAM CHANGE MODE field
Enables you to select the Program Change transmit/receive mode.
• SINGLE .........................If this button is on, Program Changes will be transmitted and received on a single MIDI
channel (Single mode).
• MULTI.............................If this button is on, Program Changes will be transmitted/received on multiple MIDI
channels (Multi mode).
• OMNI ..............................If this button is on, Program Changes on all MIDI channels will be received in Single mode.
Multi mode transmission/reception and Single mode transmission are disabled.
• BANK ............................If this button is on, Bank Select messages can be transmitted and received in Single mode.
(Bank Select messages switch the group of Program Change messages to be used.)
d
CONTROL CHANGE field
Enables you to switch MIDI Control Change message transmission and reception on or off.
• Tx.....................................Switches Control Change transmission on or off.
• Rx.....................................Switches Control Change reception on or off.
• ECHO.....................................Switches on or off echo output of Control Change messages. (If this function is on,
Control Change messages received from an external device will be retransmitted without modification.)
e
OTHER COMMANDS (MTC/MMC) field
Switches on or off echo output of other MIDI messages. (If this function is on, other MIDI messages received from an
external device will be retransmitted without modification.)
930
MIDI/GPI > MIDI/GPI window (MIDI SETUP page)