User Manual

Using Program Changes to recall scenes
The RIVAGE PM series enables you assign a specific scene to be recalled to each Program Change number, so
that when a scene is recalled on the RIVAGE PM series, a Program Change message of the corresponding
number will be transmitted to an external device. Conversely, the corresponding scene can be recalled when
a Program Change message is received from an external device.
1 Connect the control surface to an external device.
NOTE
If using the DSP engine, connect the DSP engine with the external devices. The subsequent explanation is for when using
the control surface.
2 As described in “Basic MIDI Settings”, select the MIDI channels that will be used to
transmit/receive Program Changes.
“Basic MIDI Settings”(p.927)
3 Press the PROGRAM CHANGE tab.
The “MIDI/GPI window (PROGRAM CHANGE page)”(p.935) appears.
932
MIDI/GPI > Using Program Changes to recall scenes