User Manual

NOTE
(
You can also press the desired parameter in the field to select it.
(
You can press a field to highlight the item you want to select, and then turn one of the screen encoders to select a
parameter.
6 Assign parameters to other control numbers in the same way.
When you operate a specified parameter on the RIVAGE PM series with these settings, the
corresponding Control Change message will be transmitted to external devices. Similarly, if
the corresponding Control Change messages are received from an external device on the
appropriate channel, the parameters assigned to those control numbers will change.
NOTE
(
You can use the CLEAR ALL button to erase all assignments to control numbers.
(
Assignments to control numbers are maintained as settings for the entire system, rather than for individual scenes.
939
MIDI/GPI > Using Control Changes to control parameters