User Manual

Using GPI IN
You can use the GPI IN ports of the GPI connector to control the parameters of the RIVAGE PM series from an
external device. For example, you could use an external switch to turn the RIVAGE PM series’s Talkback on/
off, operate the Tap Tempo function, or switch scenes.
1 Connect an external device to the GPI connector of the control surface.
NOTE
If using the DSP engine, connect the DSP engine with the external devices. The subsequent explanation is for when using
the control surface.
2 Press the SETUP button on the menu bar to access the SETUP screen.
3 Press the MIDI/GPI [CS] button to open the MIDI/GPI [CS] popup window.
NOTE
If using the DSP engine, press the MIDI/GPI [DSP] button to access the MIDI/GPI [DSP] popup window.
This screen includes several pages, which you can switch between using the tabs located at
the top of the screen.
4 Press the GPI tab.
The view switches to the “GPI page”(p.946).
944
MIDI/GPI > Using GPI IN