User Manual

Adjusting the detection point of the touch screen panels
(CS-R10, CS-R10-S, CSD-R7)
Follow the steps below to correctly align the positions of the LCD display and the touch screen panels.
1 Press the SETUP button on the menu bar to access the SETUP screen.
2 Press the MAINTENANCE button to access the MAINTENANCE popup window.
This screen includes several pages, which you can switch between using the tabs located at
the top of the screen.
3 Press the TOUCH CALIB tab.
The TOUCH SCREEN CALIBRATION screen will appear, enabling you to calibrate the touch
screen panels.
4 Press the CALIBRATE BAY L button to calibrate the left touch screen panel. Press
the CALIBRATE BAY C button to calibrate the right touch screen panel.
You can also select and calibrate both CALIBRATE BAY L and CALIBRATE BAY C simultaneously.
5 Press the START button.
A cross-shaped cursor will appear in the screen a total of four times. Press each location at
which it appears.
959
Maintenance > Adjusting the detection point of the touch screen panels (CS-R10, CS-R10-S, CSD-R7)