User Manual

Console Status
Setting the date and time of the internal clock
This section explains how to set the date and time of the clock built into the CL unit, and how to select a date
and time display format. The date and time you specify here will affect the time stamp used when saving or
loading a scene. When connected to RIVAGE PM Editor, the internal clock automatically synchronizes to the
computer’s time.
1 Press the SETUP button on the menu bar to access the SETUP screen.
2 Press the DATE/TIME button.
The “DATE/TIME popup window”(p.974) appears.
3 In the FORMAT field, press the MODE buttons several times to select the desired
format for date and time display.
You can select from the following display formats.
• Date
MM/DD/YYYY (Month/Day/Year) DD/MM/YYYY (Day/Month/Year) YYYY/MM/DD (Year/Month/Day)
• Time
24-Hour (hours shown in the range of 0–23) 12-Hour (hours shown in the range of AM0–AM11
and PM0–PM11)
4 Use the screen encoders on the top panel to specify the current date and time.
972
Console Status > Setting the date and time of the internal clock