User Manual

Panel Settings
Specifying the brightness of the touch screens, LEDs,
channel name displays, and lamps
This section explains how to specify the brightness and contrast of individual touch screens, top panel LEDs
and channel name displays, and lamps connected to the rear panel LAMP connectors of the control surface.
You can save four different settings in banks A–D, and select one of them.
1 Press the SETUP button on the menu bar to access the SETUP screen.
2 In the field located on the bottom row of the SETUP screen, press one of the BANK
A–D buttons.
You can save four different brightness settings in banks A–D, and switch among them rapidly if
desired.
975
Panel Settings > Specifying the brightness of the touch screens, LEDs, channel name displays, and lamps