User Manual

CONTROLS
You can perform panel operation of the control surface from PM Editor. Press the CONTROLS (F7) button to
access the respective SETUP screen.
NOTE
If you have selected Full Screen (F11) from the Zoom menu, each CONTROLS screen will be displayed in the meter section.
Switching CONTROLS screens
Use the left and right arrow buttons in the upper-left corner to select the desired CONTROLS screen.
MUTE MASTER screen
You can switch MUTE MASTER on or off.
USER DEFINED KEYS screen
You can switch the functions assigned in the USER DEFINED KEYS screen on or off. Buttons for the functions
that you cannot control in PM Editor will be grayed out. Only the CS-R3 has the additional E1 and E2 keys.
USER DEFINED KNOBS screen
The right side of the knob displays the function set in the USER DEFINED KNOBS screen. Buttons for the
functions that you cannot control in PM Editor will be grayed out.
995
Setting up RIVAGE PM Editor and RIVAGE PM StageMix > About RIVAGE PM Editor screens