User Manual
3
■
Preparing for the update
You will need the following items ready to execute the update procedure.
● A Windows or a Mac computer equipped with the following conditions:
OS Windows 7 (SP1), Windows 8.1 or Windows 10
OS X 10.10.5, OS X 10.11.5 or macOS 10.12
CPU
Intel Pentium 1.2GHz or Intel Celeron 1.7GHz or higher
HDD 250MB or more
Connector
An Ethernet connector that supports a data transfer rate of 100Mbps or
higher
● An Ethernet cable (CAT5e or higher recommended. Straight or cross.)
● The Dante firmware update program
Download the latest program from the following URL.
https://www.yamaha.com/proaudio/
■ Update procedure sequence
Update each firmware component in the following sequence.
To update more than one HY144-D, configure “Computer TCP/IP setting (for Dante)” and perform
“Dante firmware update” one by one.
Install the Dante Firmware Update Manager
Computer TCP/IP setting (for Dante)
Updating the Dante firmware
・For details of the Dante Firmware Update Manager, refer to “AUD-MAN-Firmware Update Manager" stored in the
compressed file folder.