User Manual

RPio222 Owner’s Manual
13
Installing an RY Card
1. Make sure that both power indicators are off.
CAUTION
Installing or removing a card while the power is on may
lead to component failure or electric shock.
2. Remove the screws that fasten the slot cover
to remove the slot cover.
Keep the cover and fixing screws in a safe place for
future use.
3. Align both edges of the metal guide with the
guide rails inside the slot, and then insert the
card into the slot.
Push the card all the way into the slot so that the
connector at the end of the card is correctly inserted
into the connector inside the slot.
4. Fasten the card using the screws attached to
the card.
If the card is not fastened securely, component failure
or malfunction may occur.
NOTE
Use a tool, such as a screwdriver, to tighten the screws
securely and affix the card.
If the screws are tightened incorrectly or insufficiently, the
shielding quality will fall short.
Installing and Removing
Optional Cards
Slot cover
Card
Metal guide