User Manual

HY144-D-SRC Firmware Update Guide 3
Before you update the firmware, you must install
the Dante Firmware Update Manager.
Double-click the Dante Firmware Update
Manager installer downloaded in “
Preparing for
the update
” (Windows:
DanteFirmwareUpdateManager-x.x.x.exe,
Mac: DanteFirmwareUpdateManager-x.x.x.dmg)
and follow the on-screen instructions to install
the firmware.
x.x.x represents the version number of the Dante
Firmware Update Manager.
In addition, extract the Dante firmware
(extension: .dnt) from the compressed file.
Only alphanumeric characters, “-” (hyphen), and
“_”(underscore) can be used in the path to save
the Dante firmware. If the path contains other
characters, Dante Firmware Update Manager will
not work properly. You must save the Dante
firmware in a directory whose name contains
only alphanumeric characters, “-” (hyphen), or
“_” (underscore) (e.g., C:\temp).
NOTE
• The “Windows Security” dialog box may appear. In such case,
click [Install this driver software anyway].
• You may be prompted to restart the computer after the
installation is complete. Before proceeding to update, restart
the computer.
• When installing the Dante Firmware Update Manager,
temporarily disable any running anti-virus software.
Install the Dante Firmware Update Manager