User Manual

+
Set TO ST A and B for multiple channels
+
Set TO ST A and B for multiple channels
SELECTED CHANNEL SHORTCUT
(Only for PM10/PM7)
Reset the gains of all EQ band to 0dB
(Only for PM5/PM3)
Assign the function of the knob to the Fn Encoder
PM5/PM3*
Any knob on the screen
PM10/PM7
Press the following: To do:
Reset the gain of the selected EQ band to 0dB
Q + Gain
Bypass the selected EQ band
Frequency + Gain
Reset the gains of all bands to 0dB
Gain 1 + Gain 4
Switch the LOW band between shelving and peaking
Q 1 + Frequency 1
Select bands 1-4 (output channel only)
Select bands 5-8 (output channel only)
Gain 1 + Gain 2
Gain 3 + Gain 4
* The numbers are not printed on the
PM5/PM3 panel.
+
Set TO ST A and B for multiple channels
+
Switch the HIGH band between shelving and peaking
(input: Band 4, output: Band 8)
Q 4 + Frequency 4