User Manual

Effects Parameters
15 RIVAGE PM series Data List
Rotary
One input, two output rotary speaker simulator.
Ring Modulation
Two input, two output ring modulator.
Modulation Filter
Two input, two output modulation filter.
Dynamic Filter
Two input, two output dynamically controlled filter.
EQUALIZER
Rupert EQ 773
Models a console EQ module that Rupert Neve designed in the 1970s.
Parameter Range Description
ROTATE STOP, START Rotation stop, start
SPEED SLOW, FAST Rotation speed (see SLOW and FAST parameters)
SLOW 0.05–10.00 Hz SLOW rotation speed
FAST 0.05–10.00 Hz FAST rotation speed
DRIVE 0–100 Overdrive level
ACCEL 0–10 Acceleration at speed changes
LOW 0–100 Low-frequency filter
HIGH 0–100 High-frequency filter
Parameter Range Description
SOURCE OSC, SELF Modulation source: oscillator or input signal
OSC FREQ 0.0–5000.0 Hz Oscillator frequency
FM FREQ. 0.05–40.00 Hz Oscillator frequency modulation speed
FM DEPTH 0–100% Oscillator frequency modulation depth
SYNC OFF, ON Tempo parameter sync on/off
FM NOTE
*1
*1.
Used in conjunction with TEMPO to determine FM FREQ.
Parameter Range Description
FREQ. 0.05–40.00 Hz Modulation speed
DEPTH 0–100% Modulation depth
PHASE 0.00–354.38 degrees Left-channel modulation and right-channel modulation phase difference
TYPE LPF, HPF, BPF Filter type: low pass, high pass, band pass
OFFSET 0–100 Filter frequency offset
RESO. 0–20 Filter resonance
LEVEL 0–100 Output level
SYNC OFF, ON Tempo parameter sync on/off
NOTE
*1
*1.
Used in conjunction with TEMPO to determine FREQ.
Parameter Range Description
SENSE 0–100 Sensitivity
DIR. UP, DOWN Upward or downward frequency change
DECAY 3.34 ms–42.7 s Filter frequency change decay speed
TYPE L PF, HP F, BP F Fil t er t y pe
OFFSET 0–100 Filter frequency offset
RESO. 0–20 Filter resonance
LEVEL 0–100 Output Level
Parameter Range Description
LC FREQ OFF, 50, 80, 100, 300 Hz Frequency of the low cut filter
LF GAIN –16.0 to 16.0 dB Gain of the low shelving filter
LF FREQ OFF, 35, 60, 110, 220 Hz Frequency of the low shelving filter
MF GAIN –18.0 to 18.0 dB Peaking gain
MF FREQ OFF, 360, 700 Hz, 1.6, 3.2, 4.8, 7.2 kHz Peaking frequency
HF GAIN –18.0 to 18.0 dB Gain of the high shelving filter
DRIVE 0.0 to 10.0 Amount of head amp overtones
EQL OFF, ON Equalizer on/off