User Manual

CONTENTS
Theatre mode
6 RIVAGE PM series V2.5 Supplemental Manual
■ To set up a actor library:
1. Press the PATCH button on the menu bar to access the PATCH screen.
2. Press the ACTOR tab to access the ACTOR LIBRARY screen.
1 INPUT NAME column
Indicates the input channels that can be assigned to a actor library.
2 ACTOR LIBRARY column
Indicates the names of configured actor libraries. Press one of the library names to access the
ACTOR LIBRARY popup window, in which you can configure the corresponding actor
library.
3 UPDATE button
Updates the library to reflect current data.
4 RECALL button
Recalls the library assigned to the corresponding channel. The edited current data will be
overwritten by the recalled library data.
5 DEFAULT button
Cancels the library settings and initializes the current data in four banks for EQ and dynamics.
6 INPUT NAME select knob
Use the corresponding screen encoder or the [TOUCH AND TURN] knob.
7 UPDATE EDITED button
Updates all edited channel library settings.
8 RECALL EDITED button
Recalls all edited channel library settings.
9 DEFAULT ALL button
Cancels all channel library settings and initializes the current EQ and dynamics data in four
banks.
3. Configure and/or edit a desired actor library as necessary.
NOTE
• The CH COPY function will not copy any channel-related actor libraries. The CH MOVE function will
move a actor library.
• Input EQ library and dynamics library are shared by Default mode and Theatre mode. However, the
EQ and dynamics parameter settings for the input channel library are not shared by both modes.
Therefore, in Theatre mode, the EQ and dynamics parameters for input channels will be excluded
from being the target of a recall operation.
3
76 8 9
4
5
21